Myson Touch RS Provozní pokyny Strana 1

Operating InstructionsMyson Touch RS 10/12 Revision 1 Ref: Myson Touch RS

8Temperature DisplayRoom Temp = This is the current room temperature. Floor Temp = This is the current floor temperature. SET = This is the temperature

9Comfort Levels ExplainedComfort levels allow you to set the Programmable Room Stat to control different temperatures for selected periods throughout

10Factory Programmed Comfort LevelsThe following comfort levels are programmed already. However, they can easily be changed.Weekday Level Time Tem

11Changing the Comfort Levels• PressPROGandselectMorning.• Use to set the time for the 1st Comfort level.• Use to set the temperature in °C

Locking the KeypadThe thermostat has a keylock facility. To enable this press the bottom right corner of the display and hold for 10 seconds.When acti

13Temperature HoldThe Temperature HOLD function is ideal for parties or when you will be going out for a number of hours. It allows you to hold a temp

14•PressDONE•TocancelaHoliday,reducetheHolidaytimeto00days.During a holiday program the hot-water output is turned off. Heat On / OffFros

15To Clean the ScreenPressing SCREEN will disable all buttons, allowing you 15 seconds to wipe the screen clean.Factory ResetThe thermostat ha

16THE FOLLOWING SETTINGS ARE OPTIONAL AND IN MOST CASES NEED NOT BE ADJUSTEDOptional Features ExplainedFeature 01 – Temperature Format: This function

17Feature 04 – Frost Protect Temperature: This is the temperature maintained when the thermostat is in frost mode. The range is 6 - 17°C, the default

18Feature 09 – Floor Limit Sensor: This function allows you to set a maximum floor temperature in order to protect the floor surface from overheating. T

19Feature 12 – 5/2 Day 7 Day, Programmable: This function allows you to switch between 5/2 Day Programming (4 levels for the weekday, 4 for the weeken

Feature Table Feature Description Setting 01 Temperature Format 00=°C 01=°F 02 Switching 0.5=0.5°C 3.0=3°C Differential 1.0°C = Default

Feature Table (continued) Feature Description Setting 08 Sensor Selection 00=Built in Sensor 01=Remote Air Sensor    02=Builtin&Fl

22Re-calibrating the thermostatIf you need to re-calibrate the thermostat follow these instructions:1. Press and hold the OFF button to turn the ther

23Myson Touch RSNLNEMYSON(Heating)MPE222Brown.Grey.Blue.Orange.ENLE N NS/LP/LP&BS/LH = HEATINGP&B = PUMP & BOILERE = EARTHN = NEUTRALP/L =

24Myson Touch RSREMOTE SENSORMYSON TOUCH RSTypical WiringRTANMYSON TOUCH RS+COHEATINGL1A2-Power Input.230V ac50Hz.Switched LiveREMOTE SENSORRTANMYSON

25

MYSONEastern Avenue, Team Valley,Gateshead,Tyne&WearNE110PG,UKT: +44 (0)845 402 3434F: +44 (0)191 491 [email protected]

11Contents Page Display Symbols Explained 7 Temperature Display 8 Setting the Clock 8 Comfort Levels Explained 9-11 Locking the Keypad 12

2What is a programmable room thermostat?A programmable room thermostat is both a programmer and a room thermostat. A programmer allows you to set “On”

3Any setting selected will not affect how quickly the room cools down. Turning a programmable room thermostat to a lower setting will result in the ro

4whole house. If you do have TRVs, you can choose a slightly higher setting to make sure that even the coldest room is comfortable. In the other rooms

5Installation ProcedureDO’s1. Do mount the thermostat at eye level.2. Do read the instructions fully so that you get the best from our product.DON’T

6InstallationThe thermostat is designed to be flush mounted; a back box of 25mm should be sunk in the wall prior to installation.Step 1Carefully separa

7Display Symbols Explained Symbol Description Heat On Icon Shown when the heating is On Flashing when the Smart Start is in operation. Fros